Implementation of Simple Additive Weighting Method for Biomass Selection in IoT-Based Smart Stove
Keywords:
Smart stove, internet of things, simple additive weighting, biomassAbstract
Technology is now needed most in everyday society. Many things have changed to become modern and sophisticated because of the role of technology. It helps with cooking food or drinks at home. The stove is one of the most critical components in the kitchen. A furnace can help cook food or beverages. The use of gas stoves is cost-intensive. Liquid petroleum gas (LPG) is a stove fuel often used by people for cooking. As cooking demands increase, gas consumption increases, causing gas expenses to become more and more costly. We make an intelligent or innovative stove with advantages. This smart stove is medium and portable so that it can be taken anywhere; besides that, this tool uses a supercapacitor to store the electric voltage generated in the heat of biomass combustion; this tool can generate electricity from biomass and solar cells. The selection of biomass types using the Simple Additive Weighting (SAW) method, namely wood or waste. The Internet of Things (IoT) is an information medium for the innovative stove process. In addition to cooking, this tool can turn on 1 LED lamp measuring 5-10 watts as a cellphone charger with as much as 5 volts or 60 minutes of charge time. The advantages of this intelligent stove are that it is beneficial to the community to reduce gas prices.References
G. Sharma, M. Kaur, S. Punj, and K. Singh, “Biomass as a sustainable resource for value‐added modern materials: a review,” Biofuels, Bioprod. Biorefining, vol. 14, no. 3, pp. 673–695, 2020.
M. Saleem, “Possibility of utilizing agriculture biomass as a renewable and sustainable future energy source,” Heliyon, vol. 8, no. 2, 2022.
N. M. Clauser, G. González, C. M. Mendieta, J. Kruyeniski, M. C. Area, and M. E. Vallejos, “Biomass waste as sustainable raw material for energy and fuels,” Sustainability, vol. 13, no. 2, p. 794, 2021.
M. D. Wijayanti, Energi Biomassa. 2023.
D. Dupli, A. Hasibuan, and I. M. A. Nrartha, “Perbandingan Ekonomis Penggunaan Kompor Listrik Induksi dan Kompor Gas LPG Dari Sisi Penggunaan Di Rumah Tangga,” VOCATECH Vocat. Educ. Technol. J., vol. 5, no. 1, pp. 11–21, Sep. 2023, doi: 10.38038/vocatech.v5i1.122.
F. J. Rohma, “Rancang Bangun Sistem Kontrol Otomatis Kompor Gas Elpiji Konvensional Pada Proses Perebusan Air Berbasis Arduino Uno,” J. Tek. Elektro, vol. 06, no. mor 03 Tahun 2017, pp. 163 – 173, 2017, doi: https://ejournal.unesa.ac.id/index.php/jurnal-teknik-elektro/article/view/19931.
J. Zulfadli and Habibullah Habibullah, “Perancangan Sistem Kontrol Kelistrikan Otomatis Kompor Listrik Halogen Berbasis Mikrokontroler,” JTEIN J. Tek. Elektro Indones., vol. 2, p. 1, 2021.
O. Vermesan and P. Friess, Internet of things applications-from research and innovation to market deployment. Taylor & Francis, 2014.
A. I. Lubis, P. Sihombing, and E. B. Nababan, “Comparison saw and moora methods with attribute weighting using rank order centroid in decision making,” in 2020 3rd International Conference on Mechanical, Electronics, Computer, and Industrial Technology (MECnIT), 2020, pp. 127–131.
I. Kaliszewski and D. Podkopaev, “Simple additive weighting—A metamodel for multiple criteria decision analysis methods,” Expert Syst. Appl., vol. 54, pp. 155–161, 2016.
B. S. Sinaga and F. Riandari, “Implementation of Decision Support System for Determination of Employee Contract Extension Method Using SAW,” J. Comput. Networks, Archit. High Perform. Comput., vol. 2, no. 2, pp. 183–186, 2020.
F. Amalina, A. S. Abd Razak, S. Krishnan, H. Sulaiman, A. W. Zularisam, and M. Nasrullah, “Biochar production techniques utilizing biomass waste-derived materials and environmental applications–A review,” J. Hazard. Mater. Adv., vol. 7, p. 100134, 2022.
N. Somu and A. Kowli, “Evaluation of building energy demand forecast models using multi-attribute decision making approach,” Energy Built Environ., vol. 5, no. 3, pp. 480–491, 2024.
B. Zolghadr-Asli, O. Bozorg-Haddad, M. Enayati, and X. Chu, “A review of 20-year applications of multi-attribute decision-making in environmental and water resources planning and management,” Environ. Dev. Sustain., vol. 23, no. 10, pp. 14379–14404, 2021.
H. Sismoro and Hartatik, “Multi Attribute Decision Making – Penggunaan Metode Saw dan WPM dalam Pemilihan Proposal UMKM,” J. DASI, vol. 14, p. 30, 2013.
S. Kusumadewi, S. Hartati, A. Harjoko, and R. Wardoyo, Fuzzy multi-attribute desision making (Fuzzy MADM). Graha llmu : Yogyakarta, 2006.
J. George, P. Arun, and C. Muraleedharan, “Region-specific biomass feedstock selection for gasification using multi-attribute decision-making techniques,” Int. J. Sustain. Eng., vol. 14, no. 5, pp. 1101–1109, 2021.
D. A. Agar, P. Hansen, M. Rudolfsson, and B. Blagojević, “Combining behavioural TOPSIS and six multi-criteria weighting methods to rank biomass fuel pellets for energy use in Sweden,” Energy Reports, vol. 10, pp. 706–718, 2023.
V. Gupta, M. Sharma, R. K. Pachauri, and K. N. D. Babu, “A low-cost real-time IOT enabled data acquisition system for monitoring of PV system,” Energy Sources, Part A Recover. Util. Environ. Eff., vol. 43, no. 20, pp. 2529–2543, 2021.
Downloads
Published
How to Cite
License
Copyright (c) 2024 Tijaniyah
This work is licensed under a Creative Commons Attribution 4.0 International License.
